Manufacturer: Boltmark

Hex bolt M12 × 20 mm, zinc plated

Boltmark M12 × 20 mm hex head bolt in property class 8.8 steel with a bright zinc finish. A general-purpose structural bolt for steelwork, machinery guards, brackets and racking, sold in packs of 50 with consistent threads that run on cleanly every time.
SKU: BM-HBM1220
In stock
Availability: In stock
Price
$0.50

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $0.48
50–199 $0.45
200+ $0.42

Sold in bolts. Quantities round up to full packs.

Accessories and spares

Description

Overview

This is the everyday high-tensile bolt, the one most fitters reach for first, for workshop, site and maintenance work. Each bolt is cold forged from medium carbon steel, quenched and tempered to property class 8.8, then given a thin layer of bright zinc with a clear trivalent passivate. The result is a strong, clean fastener that resists light corrosion indoors and in covered areas.

The M12 × 20 mm size has a metric coarse thread and a standard hexagon head, so it works with the spanners, sockets and nuts your team already carries.

Sold in packs of 50 bolts.

Where to use it

Grade 8.8 bolts suit most bolted joints that carry real load but are not exposed to the weather. Typical jobs include:

  • Fixing brackets, base plates and cleats to steel sections
  • Assembling pallet racking, shelving and mezzanine handrails
  • Machine guards, frames and conveyor supports
  • Vehicle bodies, trailers and agricultural equipment kept under cover
  • General repairs in maintenance and fabrication shops

Design and construction

The head is marked 8.8 together with the maker's mark, so inspectors can confirm the grade after fitting. Shorter lengths are threaded right up to the head; longer lengths have a plain shank under the head, which gives better shear strength where the shank sits in the joint.

The zinc layer is applied after heat treatment and baked where needed, so the bolt keeps its strength. The trivalent passivate contains no hexavalent chromium.

Choosing the right size

As a rule, the bolt should pass through all the parts being joined plus a full nut and washer, with at least two threads showing beyond the nut. Add the thickness of the joint, a washer under the head if needed, a washer under the nut and the nut height, then round up to the next length in the range.

Pick the diameter from the load and the hole size. Clearance holes are normally 1 mm over the bolt diameter for M6 to M10 and 1.5 to 2 mm over for M12. If you are unsure, the technical tab lists minimum tensile loads and suggested tightening torques for each size.

Installation and care

Use a matching grade 8 nut. A flat washer under the turning part spreads the load and protects painted surfaces. Tighten with a calibrated torque wrench to the value in the specifications, which assumes clean, lightly oiled zinc threads. Do not reuse bolts that have been tightened close to yield on critical joints.

Store packs in a dry place. Zinc protects well indoors, but outdoors, near the coast or in wet process areas choose the A2 stainless version instead.

Packaging and ordering

Bolts come in labelled packs of 50 with the size, grade and barcode on the front, so stores teams can scan them straight onto shelves. Trade account holders can add several sizes at once with quick order and see their tier price for larger quantities in the basket. Matching nuts and washers are listed below.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Thread size M12
Length (mm) 20
Material Steel grade 8.8
Finish Zinc plated
General
Brand Boltmark
Product type Hex head bolt, metric coarse thread
Application Structural and general engineering joints, indoors or under cover
Country of manufacture Taiwan
Warranty 12 months against manufacturing defects
Performance
Minimum tensile load (kN) 67.4
Recommended tightening torque (Nm) 86
Neutral salt spray to white rust (h) 24 (ISO 9227)
Operating temperature (°C) -40 to +150
Dimensions and weight
Thread pitch (mm) 1.75
Thread length (mm) Threaded to head
Width across flats (mm) 18
Head height (mm) 7.5
Weight per 100 pieces (kg) 3.08
Packed weight (kg) 1.56
Materials and construction
Tensile strength (MPa) 800 nominal
Yield strength (MPa) 640 minimum
Thread type Metric coarse, tolerance 6g
Head marking 8.8 and maker's mark
Coating thickness (µm) 5 to 8
Passivation Clear trivalent, Cr(VI) free
Compliance and safety
Standards ISO 4014 / ISO 4017, ISO 898-1, ISO 4042
CE / UKCA marked Not required for this product
RoHS compliant Yes
Packaging and ordering
Pack quantity 50 bolts
Barcode type EAN-13 on pack label
Recommended nut Hex nut or nyloc nut, grade 8, same thread size
Storage temperature (°C) 5 to 30, dry

FAQs

What does grade 8.8 mean?

The first 8 means a nominal tensile strength of 800 MPa. The second 8 means the yield point is 80% of that, so 640 MPa. It is the standard high-tensile grade for general engineering and is roughly twice as strong as a basic grade 4.6 bolt.

Are these bolts fully threaded?

Short lengths are threaded up to the head. Longer lengths have a plain shank under the head and a thread length of about twice the diameter plus 6 mm. The thread length for each size is shown in the technical specifications.

Which nut should I use with an 8.8 bolt?

Use a grade 8 nut of the same thread size, such as our zinc plated hex nuts or nyloc nuts. A lower grade nut can strip before the bolt reaches its rated load.

Can I use zinc plated bolts outdoors?

Bright zinc is meant for indoor and sheltered use. Outdoors it will show white rust and then red rust within months, especially near the sea or roads that are gritted. For exposed joints choose the A2 stainless steel bolts.

How tight should I do them up?

The specifications give a suggested torque for each size, based on clean, lightly oiled zinc threads. Lubricants, washers and coatings change the result, so follow the designer's figure where one is given.

Can I buy a single bolt or a bigger box?

Bolts are sold in packs of 50. Trade customers buying regularly can order several packs at once with quick order, and tier prices apply automatically in the basket when you are signed in to your account.