Overview
This is the everyday high-tensile bolt, the one most fitters reach for first, for workshop, site and maintenance work. Each bolt is cold forged from medium carbon steel, quenched and tempered to property class 8.8, then given a thin layer of bright zinc with a clear trivalent passivate. The result is a strong, clean fastener that resists light corrosion indoors and in covered areas.
The M10 × 40 mm size has a metric coarse thread and a standard hexagon head, so it works with the spanners, sockets and nuts your team already carries.
Sold in packs of 50 bolts.
Where to use it
Grade 8.8 bolts suit most bolted joints that carry real load but are not exposed to the weather. Typical jobs include:
- Fixing brackets, base plates and cleats to steel sections
- Assembling pallet racking, shelving and mezzanine handrails
- Machine guards, frames and conveyor supports
- Vehicle bodies, trailers and agricultural equipment kept under cover
- General repairs in maintenance and fabrication shops
Design and construction
The head is marked 8.8 together with the maker's mark, so inspectors can confirm the grade after fitting. Shorter lengths are threaded right up to the head; longer lengths have a plain shank under the head, which gives better shear strength where the shank sits in the joint.
The zinc layer is applied after heat treatment and baked where needed, so the bolt keeps its strength. The trivalent passivate contains no hexavalent chromium.
Choosing the right size
As a rule, the bolt should pass through all the parts being joined plus a full nut and washer, with at least two threads showing beyond the nut. Add the thickness of the joint, a washer under the head if needed, a washer under the nut and the nut height, then round up to the next length in the range.
Pick the diameter from the load and the hole size. Clearance holes are normally 1 mm over the bolt diameter for M6 to M10 and 1.5 to 2 mm over for M12. If you are unsure, the technical tab lists minimum tensile loads and suggested tightening torques for each size.
Installation and care
Use a matching grade 8 nut. A flat washer under the turning part spreads the load and protects painted surfaces. Tighten with a calibrated torque wrench to the value in the specifications, which assumes clean, lightly oiled zinc threads. Do not reuse bolts that have been tightened close to yield on critical joints.
Store packs in a dry place. Zinc protects well indoors, but outdoors, near the coast or in wet process areas choose the A2 stainless version instead.
Packaging and ordering
Bolts come in labelled packs of 50 with the size, grade and barcode on the front, so stores teams can scan them straight onto shelves. Trade account holders can add several sizes at once with quick order and see their tier price for larger quantities in the basket. Matching nuts and washers are listed below.
Demo product: invented for the Cartenvo B2B demo store.