Manufacturer: Torqline

Tape measure 5 m

Torqline 5 m tape measure with a rubber-armoured case, a nylon-coated steel blade and a magnetic end hook. It is EU Class II accurate, the thumb lock holds the blade firmly, and the belt clip keeps it on hand on site.
SKU: TQ-TM5M
In stock
Availability: In stock
Price
$7.00

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $6.65
50–199 $6.30
200+ $5.95

Description

Overview

The Torqline 5 m tape measure is built for daily site use. A rubber-armoured ABS case absorbs knocks and drops, and the blade is coated with clear nylon so the markings do not wear off.

The end hook is magnetic on its face, so it holds on steel studs, beams and ductwork when you are measuring alone.

Who it is for

Carpenters, electricians, plumbers, shopfitters and maintenance teams all use a tape every day. The sizes cover close work, general fitting and room-scale measuring.

  • Marking out timber, board and metal
  • Measuring for cable runs and conduit
  • Room, door and window dimensions
  • Checking stock lengths and deliveries
  • Setting out fixings and brackets

Design and construction

The blade is spring steel with a slight curve, which keeps it rigid when extended. Graduations are in millimetres and centimetres, with metre marks in red. The end hook is riveted and slides by its own thickness, so readings are true whether you hook over an edge or push against a face.

A thumb lock holds the blade at any length, and a spring retracts it smoothly. The stainless steel belt clip is riveted to the case.

Choosing the length

The 3 m tape is pocket-sized and suits joinery and electrical work. The 5 m tape is the all-round site choice. The 8 m tape has a wider, stiffer blade that stands out further for room and site measuring.

All three meet EU Class II accuracy under the Measuring Instruments Directive, which permits ±2.3 mm over 10 m.

Reading and marking

Read the blade square on, not at an angle, to avoid parallax errors of a millimetre or two. For inside measurements, such as a window reveal, push the case into the corner and add the case length printed on its base to the reading on the blade.

Mark with a sharp pencil and a V or a tick pointing to the exact line, rather than a short dash. When you cut several pieces to the same length, measure each one from the same end and the same face, so small errors do not add up along the job.

For long runs beyond the blade length, mark a reference point and measure on from it, writing down each length as you go. Where accuracy matters over longer distances, check against a second tape or a laser measure. The 5 m tape fits a belt pouch or pocket alongside a pencil and knife, so it is always to hand.

Use and care

Guide the blade back by hand rather than letting it fly in, as a hard return can bend the hook and affect accuracy. Wipe off mud, plaster and water before retracting, and let a wet tape dry fully extended.

Trade customers often order tapes in multiples for new starters; tier prices apply to larger quantities.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Size 5 m
General
Brand Torqline
Product type Tape measure
Application Measuring and marking out on site and in the workshop
Country of manufacture China
Warranty 1 year
Performance
Accuracy class EU Class II
Graduations mm and cm, red metre marks
Standout (m) 2.2
Blade lock Thumb lock
End hook Magnetic, riveted, true-zero
Operating temperature (°C) -10 to 50
Dimensions and weight
Blade width (mm) 19
Dimensions (L × W × H, mm) 72 × 38 × 70
Net weight (kg) 0.25
Packed weight (kg) 0.28
Materials and construction
Blade material Spring steel, nylon coated
Case material ABS with rubber armour
Belt clip Stainless steel, riveted
Compliance and safety
Standards Measuring Instruments Directive 2014/32/EU
CE / UKCA marked Yes
Packaging and ordering
Pack quantity 1
Pack type Hanging card
Barcode type EAN-13
Storage temperature (°C) -20 to 60

FAQs

Why does the end hook move?

The hook slides by exactly its own thickness. That keeps the reading correct whether you hook it over an edge or push it against a surface. Do not bend or tighten it.

What does Class II accuracy mean?

It is the accuracy class set by the EU Measuring Instruments Directive for general-purpose tapes. A Class II tape is accurate to within ±2.3 mm over 10 m, which is fine for construction and installation work.

Does the tape show imperial units?

No. These tapes are metric only, in millimetres and centimetres. Metric-only blades are easier to read and avoid mistakes when working from metric drawings.

How far does the blade stand out?

About 1.5 m for the 3 m tape, 2.2 m for the 5 m and 2.8 m for the 8 m before the blade folds. The wider blade on the longer tapes gives the extra reach.

What should I do if the tape gets wet?

Pull it out fully, wipe it with a dry cloth and let it dry before retracting. Trapped water and grit cause rust and wear the blade coating.

Will the magnet affect electronics?

The magnet is small and only on the hook face. It is safe to carry with phones and meters, but keep it away from bank cards and pacemakers as you would any magnet.