Product overview
The Clearvane mop bucket combines a moulded polypropylene bucket, a downpress wringer and a set of non-marking castors in one easy-to-move unit. It is made for daily mopping in offices, shops, schools, kitchens and warehouses, where a cleaner moves from room to room.
The wringer presses the mop against a perforated plate with a lever handle, so the operator can wring a heavy mop out evenly without twisting their wrists or touching the dirty mop.
Design and construction
The wringer clips onto the rim without tools and lifts off for cleaning. The colour-coding clips fit to the handle so the bucket can be matched to the area it is used in.
- Tough polypropylene body that resists cleaning chemicals
- Downpress wringer with long lever for less effort
- Four swivel castors with non-marking tyres
- Pouring lip and steel carry handle
- Litre graduations inside for accurate dilution
- Interchangeable red, blue, green and yellow clips
Choosing the right size
The 15 litre bucket is compact, lighter to move and fits easily in a cleaner's cupboard. It suits 12 oz Kentucky mops and smaller areas such as washrooms, offices and corridors.
The 20 litre bucket holds more solution, so you change the water less often on large floors. It takes 16 oz mops comfortably and suits canteens, sports halls and warehouses. Both sizes take the smaller mop heads too.
Using it well
Fill the bucket to no more than the maximum line, adding the measured amount of floor cleaner using the graduations. Dip the mop, lift it into the wringer and press the lever down. Two or three presses leave the mop damp rather than wet, which cleans better and dries faster.
Push the bucket by the wringer handle rather than pulling the mop handle, and take care on ramps and thresholds.
Do not overfill: a full bucket is heavy, slops over when moved and leaves puddles that become a slip hazard. Many cleaners prefer to fill the bucket in two smaller batches and change the water more often, which also keeps the solution cleaner. Empty the bucket before carrying it up or down stairs.
Cleaning and care
At the end of each shift, empty the bucket into a cleaner's sink or foul drain, never a surface water drain. Rinse the bucket and wringer, and leave them to dry upside down or with the wringer removed. Check the castors now and then for hair and threads wrapped around the axles, which make the bucket hard to push.
Ordering and sets
Many sites keep one bucket per colour so washroom and kitchen equipment never mix. Trade customers can order buckets with matching mop heads and floor cleaner on one order, and save the set as a list for new sites or replacements.
Demo product: invented for the Cartenvo B2B demo store.