Overview
Every UK 13 A plug contains a cartridge fuse that protects the flexible cord from overload and fault current. Fitting the right rating matters: too large a fuse may let a damaged lead overheat, and too small a fuse will blow when the appliance starts. These fuses are made to BS 1362 and fit all BS 1363 plugs and fused connection units.
Each fuse has a ceramic body filled with silica sand, which quenches the arc when the element melts. The rating is printed on the body and shown by its colour: red for 3 A, black for 5 A and brown for 13 A.
Where to use them
Keep a stock of all three ratings wherever appliances are maintained or tested.
- 13 A plugs on appliances and extension leads
- Fused connection units for fixed appliances
- Portable appliance testing and repair
- Maintenance stores in offices, schools and hotels
- Replacing fuses after a fault has been cleared
Choosing the right rating
Choose the rating from the appliance's power and its instructions. As a guide, use 3 A for appliances up to about 700 W, such as lamps, televisions, computers and chargers. Use 5 A for appliances that need slightly more, or where the manufacturer specifies it. Use 13 A for appliances from about 700 W to 3000 W, such as kettles, heaters, washing machines and power tools.
Always check the appliance label or instructions first, and never fit a fuse that is larger than the flexible cord can carry. A 0.5 mm² cord should have a 3 A fuse.
Design and construction
The fuse is 25 mm long and 6.3 mm in diameter, with nickel-plated brass end caps that make good contact with the clips in the plug. The fuse element is designed to carry its rated current indefinitely and to break quickly on a short circuit, with a breaking capacity of 6000 A.
Because the body is ceramic, it does not deform when the fuse operates, and the sand filling keeps the arc inside the body.
Use and care
Disconnect the plug before changing a fuse. If a fuse blows, find out why before fitting a new one: a repeated failure usually points to a fault in the appliance or the lead. Never replace a fuse with wire, foil or a fuse of a higher rating.
Store fuses in their packs, dry and clearly labelled, so the right rating is always to hand.
- Check the rating printed on the body before fitting
- Record fuse changes as part of PAT records
- Dispose of blown fuses with general waste
Packaging and ordering
Fuses come in packs of 10 in a small hanging blister marked with the rating. They are easy to add to any order and can be kept on a saved list with other maintenance stock, so a store can be topped up in one click.
Demo product: invented for the Cartenvo B2B demo store.